IP68 / IP67 / IP65 DIECAST ALUMINUM ENCLOSURES・ALUMINIUM JUNCTION BOXES・ALUMINIUM ALLOY ENCLOSURE
IP67 / IP65 DIECAST ALUMINUM ENCLOSURES・ALUMINIUM JUNCTION BOXES・ALUMINIUM ALLOY ENCLOSURE -PDFCATEGORY： DIE CAST ALUMINUM BOX・WATERPROOF ALUMINIUM BOX・IP68/IP67/IP65 DIECASTING ENCLOSURE
Diecast aluminum enclosures with higher impact resistance and in IP68/IP67/IP65 protection classes.
High heat dissipation rate and can be used as shielded enclosures when using with unfinished inside.
Can be used in severe situation in heavy industry, outdoor application or vehicle installation.
Suitable to be used for plant controller, relay boxes, machine controllers, outdoor transmitters and more.
- IP68 DIECAST ALUMINIUM ENCLOSURE - DW series
- IP68 high performance diecast aluminium box
- EMC shielding is achieved by unfinished inner side
- as well as the conductive silicone gasket.
- Suitable for use as outdoor network device and more
- NEW PRODUCT
- IP68 HEATSINK DIECAST ALUMINIUM ENCLOSURE - DWH series
- IP68 and heat dissipation diecast aluminium box
- EMC shielding achieved by unfinished inside Top cover, Base,
- as well as the conductive silicone gasket
- Suitable for use in outdoor network device and more
- NEW PRODUCT
- IP65 DIECAST ALUMINIUM BOX - AL series
- IP65 and impact resistant diecast aluminium box
- Economical and selectable from 35 different sizes
- Available as BTO (built-to-order)
- Able to order from just 1 piece
- NEW PRODUCT
- IP67 DIECAST ALUMINUM BOX - BDN series
- IP67 waterproof diecast aluminum enclosure.
- Tough and robust for heavy-duty use.
- Gray powder coated and unfinished models are available.
- 8 different sizes available.
- IP67 EMC SHIELDED DIECAST ALUMINUM BOX - HQ series
- IP67 water protection and EMC shielding aluminum enclosure.
- Double gasket construction allows both IP67 and EMC/EMI.
- For CATV transmitter, Access point, Measuring instrument.
- 8 sizes available in powder coated and unfinished models.
- DIECAST ALUMINIUM TERMINAL JUNCTION BOX - TMA series
- Diecast aluminium terminal junction box.
- IP65 waterproof class and impact resistant enclosure.
- Terminal block spec : 400V 17.5A
- 6, 9, 15, 20, and 30 pole types are available.
- MOUNTING BRACKET for BDN - CK series
- Stainless steel wall mounting bracket for BDN series.
- Sold in 4 pcs pack.
- POLE MOUNT BRACKET for DIECAST ALUMINIUM BOX
- Stainless steel pole mount bracket for AW・BDN・HQ series
- Can be attached to TAKACHI diecast boxes without hole milling.
- Use optional mounting belt to install onto a pole. (PKB series)
- POLE MOUNTING BRACKET - WGMB-2SW
- Pole mount bracket made from robust diecast aluminium.
- Bracket can be mounted on both vertically, and horizontally.
- Sealing washers enables the installation to have a protection
- class equivalent to IPX7, X5.
- NEW PRODUCT
- STAINLESS STEEL POLE MOUNTING STRAP - SNB series
- Screw adjustable type stainless steel pole mounting belt.
- Belt material : SUS304
- Wide lineup of 18 sizes from 52 mm to 308 mm.
- Use with mounting bracket SSK・WGMB・WPMB series
- POLE MOUNTING BELT- PKB series
- Universal pole mounting belt for outdoor enclosures.
- Stainless steel type and plastic type are available.
- Use SSK mounting bracket for installation onto a pole.
- STAINLESS STEEL TIES for POLE MOUNTING - SCT series
- Corrosion resistant stainless steel cable tie.
- Can be used to bundle cables or mounting enclosures to poles.
- Self-locking bracket allows easy mounting / cable bundling.
- For firm tightening, use of Tighten gun G3388 is recommended.
- NEW PRODUCT
- DIN RAIL - FDR series
- 35mm aluminium DIN Rail.
- For installation of terminal blocks, circuit breakers, or devices.
- Available in 53 different lengths.
- NEW SIZE
- DIN RAIL MOUNT BRACKET - DRM-1
- For mounting enclosures, PCB and other parts onto a DIN Rail.
- Robust metallic material allows rigid installation on DIN Rails.
- Simple installation and removal via the pull lever.
- Max load : 10kg
- NEW PRODUCT
- DIN-RAIL TERMINAL BLOCK END STOPPER - TKR series
- Stopper bracket for use with 35mm DIN Rail.
- Can be used to fix terminal blocks or modules.
- TKR-TWE1 for smaller attachment parts.
- TKR35-1 for larger / higher attachment parts.
- NEW TYPE
- ECONOMICAL DIN RAIL END STOPPER - DRS series
- Economically priced end stopper bracket.
- Can be used to fix terminal blocks or modules.
- Included screws allow affixing of stopper brackets firmly
- at a fixed location.
- NEW PRODUCT
- LOW COST IP67 METAL CABLE GLAND - RMC series
- Economical metal cable gland.
- IP67 (In-house test) protection class.
- Available thread size M12 to M32
- NEW PRODUCT
- IP68 METAL CABLE GLAND - AGM series
- High water protection IP68 metal cable gland.
- Protection class: IP68 1bar / 30min
- Wide selection, for M6 ~ M50 and PG7 ~ PG16.
- Available in 19 sizes. (Φ2 mm ~ Φ42 mm cable)
- EMC SHIELDED CABLE GLAND - AGE series
- Easy installation EMC shielding metal cable gland.
- EMC spring provides for good contact of shielding cables.
- Protection class : IP68 2bar / 30min, IP69K
- 6 different sizes for cable range φ3.5mm ~ 25.0mm.
- HEAT RESISTANT CABLE GLAND - AGH series
- Heat resistant sealing insert made of FPM material.
- Operating temperature : -40℃ ~ +200℃
- Protection class : IP68 1bar / 30min
- 6 different sizes available for cable range φ4~φ25.5mm.
- IP68 WATER PROTECTION CABLE GLAND - AG series
- High water protection IP68 cable gland.
- Tough and heat resistant PA6FG material (-20°C to +100°C)
- Wide selection for M8 ~ M50 thread
- Selectable in 15 sizes. (Φ2.5mm ~ Φ42 mm cable.)
- WEATHERPROOF CABLE GLAND - RMW series
- Weatherproof cable glands for long-term outdoor use.
- High degradation resistant silicone sealing insert and O-ring.
- Protection class : IP67
- Thread size M8 ~ M50, Cable range Φ1mm ~ Φ38 mm.
- MULTI-HOLE CABLE GLAND - RMH series
- Multi-hole cable gland with M type threads
- Up to a maximum of 6 cables can be used with 1 cable gland
- 5 thread sizes for M12・M16・M20・M25・M32
- Cable range : φ1.5mm～φ11mm
- NEW PRODUCT
- STRAIN RELIEF CABLE GLAND - RSP series
- Strain relief cable gland for protecting cables.
- Protecting class : IP67
- 7 sizes for M8・M10・M12・M16・M20・M25 in light gray / black
- Cable range : φ1mm～φ16mm
- NEW SIZE
- RIGHT ANGLED CABLE GLAND - REL series
- L-shape cable gland with M type threads
- Allow wires to be routed vertically
- 4 thread sizes for M16・M20・M25・M32
- Cable range : φ3.5mm～φ16mm
- NEW PRODUCT
- BLIND PLUG with O-ring - SHP series
- Hole plug for sealing holes that are not in use.
- IP67 rating is achieved through the use of a lock nut.
- Available in 6 sizes for φ12.2 to φ40.3 holes
- in black and light gray colors
- NEW PRODUCT
- INTERCHANGEABLE HEAD TORQUE WRENCH - TWH series
- Torque wrench with interchangeable head.
- Suitable for the tightening of cable glands
- Open end interchangeable head (spanner head)
- TWE series available separately.
- VENTILATION PLUG - CVP series
- Economical IP68 ventilation plug
- Protects enclosures from deformation by
- equalizing in/out side pressure
- Available in M6, M12, M16, and M24 sizes
- NEW PRODUCT
- METAL VENTILATION PLUG - CVP-M series
- Economical IP68 Metal ventilation plug
- Protects enclosures from deformation by
- equalizing in/out side pressure
- Available in M6, M12 and M20 sizes
- NEW PRODUCT
- PROTECTIVE VENT - PMF series
- Screw in protective vent plugs.
- Built-in membrane filter plugs with IP68 waterproof and airflow.
- Equalize pressure and reduce condensation.
- 5 different models are available.
- ADHESIVE PROTECTIVE VENT FILTER - VE8 series
- Adhesive type vent filter sheet.
- Equalize pressure and reduce condensation.
- 4 different sizes from φ7.6, φ14, φ21.5 and
- φ29mm are available.
- ADHESIVE PROTECTIVE VENT FILTER - VSC series
- Adhesive type vent filter sheet.
- Equalize pressure and reduce condensation.
- 3 different sizes from φ7.5, φ13 and φ24mm are available.
- *Discontinued in 2021.
- WATERPROOF WASHER - SZ series
- Waterproof washer for screwing onto waterproof boxes.
- Oil resistant NBR sealing material on N models.
- Superior water resistant silicone sealing material on S models.
- 8 sizes in M3, M4, M5, M6, M8, M10, M12, and M16.