WALL MOUNT BRACKET・POLE MOUNT BRACKET・BELT CLIP・MOUNTING MAGNET
WALL MOUNT BRACKET・POLE MOUNT BRACKET・BELT CLIP・MOUNTING MAGNET -PDFCATEGORY： MOUNT BRACKET・POLE MOUNTING BRACKET・BELT HOOK・NEODYMIUM MAGNET
Wall mounting brackets, pole mounting brackets, neodymium magnets for attaching onto steel pole or cabinets, and belt clips are available.
- WALL MOUNT MONITOR ARM - MAR series
- Movable wall mount suspension arm
- Suitable for mounting a touch panel controller on a machine
- Hole pitch of bracket is compatible with VESA mount standards
- 3 types can be selected
- NEW PRODUCT
- WALL SUSPENSION BRACKET - WM series
- Quick release type wall mounting bracket.
- Easy attachment and removal.
- Large and small brackets in off-white and dark gray colors.
- DOUBLE-SIDED MOUNTING TAPE - DST series
- Super strong double-sided mounting tape
- with excellent cold and heat resistance.
- Allow cases to be attached onto any place.
- Can be used with a range of products.
- POLE MOUNTING BRACKET - WPMB-M4-3
- Bracket to mount enclosures onto a pole.
- Made from weather resistant ASA material.
- Suitable for both for vertical and horizontal mounting.
- Hole milling is required for bracket installation.
- NEW PRODUCT
- POLE MOUNTING BRACKET - SSK series
- Stainless steel pole mount bracket.
- Can be attached to TAKACHI plastic boxes without hole milling.
- Use optional mounting belt to install onto a pole. (PKB series)
- 16 different sizes for variety of enclosures to mount.
- POLE MOUNTING BRACKET - PMB-1
- Small size pole mounting bracket
- Minimum applicable pole diameter Φ35
- Use SNB/PKB/SCT mounting belt together
- Installation screws (M3 size) sold separately
- NEW PRODUCT
- POLE MOUNTING BRACKET - WGMB-2SW
- Pole mount bracket made from robust diecast aluminium.
- Bracket can be mounted on both vertically, and horizontally.
- Sealing washers enables the installation to have a protection
- class equivalent to IPX7, X5.
- NEW PRODUCT
- POLE MOUNTING BRACKET - WGMB-2SW
- Pole mount bracket made from robust diecast aluminium.
- Bracket can be mounted on both vertically, and horizontally.
- Sealing washers enables the installation to have a protection
- class equivalent to IPX7, X5.
- NEW PRODUCT
- DIECAST ALUMINIUM POLE MOUNTING BRACKET for WG ・ WGV
- Diecast aluminium pole mount bracket
- Can be attached without hole milling
- Available with W or D direction install
- Advisable to use with SNB,PKB,SCT mounting belt
- NEW PRODUCT
- STAINLESS STEEL TIES for POLE MOUNTING - SCT series
- Corrosion resistant stainless steel cable tie.
- Can be used to bundle cables or mounting enclosures to poles.
- Self-locking bracket allows easy mounting / cable bundling.
- For firm tightening, Use of Tighten gun G3388 is recommended.
- NEW PRODUCT
- TIGHTEN GUN for STAINLESS STEEL TIE
- Tool for cutting and tightening stainless steel strap.
- *Be careful of the sharp cut-edge of strap.
- Note: this product is not subject to RoHS regulations.
- NEW PRODUCT
- POLE MOUNTING BELT - SNB series
- Screw adjustable type stainless steel pole mounting belt.
- Belt material : SUS304
- Wide lineup of 18 sizes from 52 mm to 308 mm.
- Use with mounting bracket SSK・WGMB・WPMB series
- NEW PRODUCT
- POLE MOUNTING BELT- PKB series
- Universal pole mounting belt for outdoor enclosures.
- Stainless steel type and plastic type are available.
- Use SSK mounting bracket for installation onto a pole.
- NEODYMIUM MAGNET - NMG
- Neodymium magnet for small enclosures.
- Strong adhesion to the steel wall, machinery or pole.
- Countersunk hole models for easy installation.
- 4 sizes, with or without installation hole.
- STEEL BELT CLIP - DK series
- Steel belt clips made of chrome plated steel.
- 2 sizes are available.
- PLASTIC BELT CLIP - GDH series
- Plastic belt clip.
- Please use with a handheld enclosure.
- Available in 3 colors, white, white gray and black.
- MOUNTING BRACKET for HINGED PLASTIC BOX - BFL series
- Mounting brackets for BCAP・BCPC・BCPK・BCAR・BCPR
- Made of tough and strong glass fiber filled polycarbonate.
- 2 different sizes, 2 colored types to match box colors.
- STAINLESS STEEL BRACKET for HINGED BOX - CK series
- Stainless steel wall mounting bracket.
- For BCAP・BCPC・BCPK・BCAR・BCPR series.
- Sold in 4 pcs pack.
- MOUNTING BRACKET for BCAS・BCAL - CK series
- Stainless steel wall mounting bracket.
- For BCAS・BCAL series.
- Sold in 4 pcs pack.
- MOUNTING BRACKET for BDN - CK series
- Stainless steel wall mounting bracket for BDN series.
- Sold in 4 pcs pack.
- MOUNTING BRACKET for TMB - CK series
- Stainless steel wall mounting bracket for TMB series.
- Sold in 4 pcs pack.
- CUBE STANDOFF - CUBE series
- 10x10mm cube shape standoff.
- Standoff with a thread on 4 faces.
- Usable when installing PCB or metal plate upright.
- M3 and M4 thread models available.
- STAINLESS STEEL HOSE CLAMP - SNB series
- Screw adjustable type stainless steel hose clamp.
- Clamp band for hoses for air, liquid, and oil.
- Belt material : SUS304
- Wide lineup of 23 sizes from 8 mm to 308 mm.
- NEW PRODUCT